The re-man injectors are fairly pricey at $79 ea. I suppose I'll have to wait and see whether this is a good idea or not. Loyd will charge you about the same or a bit more once done, you only other option is to have them sent over to Vancouver Jims Fuel Injection, if memorey serves for around 50.00 a pop.
Remove the board under the carpet, if you have it. Remove the spare tire. Remove the nine (9) screws holding the fuel pump access panel down. A power screwdriver is very helpful here. A number of the screws in mine were stripped. Disconnect the fuel pump electrical connector. Remove the clamp holding the fuel pump boot in place with a 6mm socket.
Remove the old injectors. Once a truck is stabilized in a service bay with the keys removed from its ignition and battery supply disconnected, a technician can begin the process of removing the old fuel injectors.
How to remove and replace the injectors on a cummins 24 valve vp44 truck. Dodge Ram 2500 3500 5.9 diesel. Dodge Ram 2500 3500 5.9 diesel.
Washer Kit for 1HD-T injectors: Ordered an injector washer kit (includes 6 copper injector "seats" that are the correct 2.5mm thickness for vehicles made before 8/1992, 6 O-rings, and finally 12 washers for the nozzle leakage pipe connection) that ran about $58 (USD) shipped from Australia. For vehicles after 8/1992, the nozzle seat got thicker
. 16 254 346 357 347 269 422 463
how to remove diesel injectors
